JVC 0397MKV*UN*VP - Manual (Page 22)

22
File
New Album
Open Album
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
Save Image As…
Exit
Ctrl+S
Ctrl+A
HOW THE DESKTOP WORKS (cont.)
Each pulldown menu is configured as follows
Set-up
Capture Mode
Image Format
Device Change
Initialize
ID Change
Counter Reset
Edit
Transfer the Index Image
Transfer the Full Image
Modify…
Delete
Del
Two different modes available: Step by Step Capture and Automatic Capture
(
੬
p. 25, 26, 28).
Selects image data format to be used in the transfer and capture mode
(
੬
p. 30).
To initialize a connected unit or to change a connected unit (
੬
p. 18).
Initialize when changing a COM port or transfer rate (
੬
p. 17).
Changes the Video Capture unit’s ID number (
੬
p. 31).
Resets the VCR's counter (
੬
p. 32).
Saves the image data file to another folder or drive (
੬
p. 29).
Closes the program (
੬
p. 19).
•An index image of the image data in the Video Capture Docking
Station memory is transferred to your computer and displayed in
the selected image box (in the Step by Step capture mode).
•The video source unit scans the selected counter value and
transfers the index image to your computer (in the automatic
capture mode) (
੬
p. 32).
•A full image of the image data in the Video Capture Docking
Station memory is transferred to your computer (in the Step by
Step capture mode).
•The video source unit scans the selected counter value and
transfers the full image data (768 x 552 pixels) to your computer
(in the automatic capture mode) (
੬
p. 32).
Changes the scan timing in the automatic capture mode by chang-
ing the counter preset (
੬
p. 32).
Deletes the index image (
੬
p. 31).
Erases the image currently on screen and creates a new image.
Opens an index file (
੬
p. 33).
Stores the index image on screen (
੬
p. 29).
Opens a JLIP Player software file (
੬
p. 34) .
Converts to and saves as a JLIP Player software file (
੬
p. 35).