JVC 0397MKV*UN*VP - Manual (Page 63)

63
Changing the name of the device
1 ACCESS "NAME CHANGE"
DIALOG BOX
Choose "Name Change" from "File" on
the MOVIE PLAYER window.
•The "Name Change" dialog box
appears.
2 SELECT DEVICE
Click on the name of the device and
"CHANGE".
•The dialog box to enter new name of
the device appears.
3 ENTER NEW NAME
4 SET NEW NAME
Click "OK".
•The message "Device name will be
changed." appears.
Clicking "OK" again sets that device
name and brings up the "Name
Change" dialog box.
5 RETURN TO MOVIE PLAYER
WINDOW
Click "CLOSE".
Name Change
Select the device to change.
06:VCRCAMERA
VCR
VIDEO PRINTER
CHANGE
CHANGE
CLOSE
Name Change
CANCEL OK
VCRCAMERA (1) 06 =
Enter new name (up to 20 letters).
Changing the device to use while
connecting over two same type
devices
1 ACCESS "DEVICE SELECTION"
DIALOG BOX
Choose "Device Change" from "File" on
the MOVIE PLAYER window.
•The "Device Selection" dialog box
appears.
2 SELECT DEVICE
Click on the name of the device and
"OK".
NOTE:
It is impossible to use two same type devices
simultaneously.
When Using the Video Capture Software
The JLIP Player Software and JLIP Video
Capture Software cannot run simultaneously.
When you want to run the JLIP Video
Capture Software, first select "Close Serial"
from "File" on the menu bar. To resume using
the JLIP Player Software, click the "JLIP"
button in the JLIP Video Capture Software
and select "Open Serial" from "File" on the
JLIP Player Software's menu bar.
Device Selection
Select Devices to control.
DISCONNECT
06:VCRCAMERA (1)
07:VCRCAMERA (2)
VCR
VIDEO PRINTER
OK
CANCEL
DISCONNECT