JBL SYNTHESIS SDP-40 - Manual (Page 15)

Getting Started
JBL
1-4
INSTALLATION CONSIDERATIONS
The SDP-40 requires special care during installation to ensure
optimal performance. Pay particular attention to the bulleted items
that begin below and to other precautions that appear throughout
this user guide.
DO
• Install the SDP-40 on a solid, flat, level surface such as a table ,
shelf, or in a standard 19-inch equipment rack using the
enclosed rack-mount kit.
• Select a dry, well-ventilated location out of direct sunlight.
DO NOT
• Expose the SDP-40 to high temperatures, humidity, steam,
smoke, dampness, or excessive dust. Avoid installing the SDP-
40 near radiators and other heat-producing appliances.
• Install the SDP-40 near unshielded TV or FM antennas, cable TV
decoders, and other RF-emitting devices that might cause
interference.
DO NOT (continued)
• Place the SDP-40 on a thick rug or carpet or cover the SDP-40
with a cloth, as this might prevent proper cooling.
• Place the SDP-40 on a windowsill or in another location in
which it will be exposed to direct sunlight.
• Obstruct the front panel IR receiver. When the SDP-40 is not
using the rear panel IR IN connector, the remote control must
be in line-of-sight with the IR receiver for proper operation.
Before moving the SDP-40, make sure it is powered off with
the rear panel power switch. Then, make sure the power cord
is unplugged from the wall outlet.
CAUTION