JBL SYNTHESIS SDP-40 - Manual (Page 88)

SETUP
SDP-40
3-48
REC PWR ON LAST LVL, -80 to +6dB
Selects the volume level at which the Record
Zone activates. When a value is selected, the
SDP-40 automatically sets Record Zone
REC PWR ON VOLUME CONTROLS SETUP
TRIGGER 1 SETUP
REMOTE ONLY OFF
DVD1 OFF
DVD2 OFF
LD OFF
TV OFF
SAT OFF
VCR OFF
CD OFF
PVR OFF
GAME OFF
TAPE OFF
TUNER OFF
AUX OFF
ZONE2 INPUTS OFF
RECORD INPUTS OFF
FILM ON
TV ON
MUSIC ON
MUSIC SURR ON
PLII + ON
PLII MOVIE ON
PLII MUSIC ON
PRO LOGIC ON
FILM ON
MUSIC OFF
NIGHTCLUB ON
CONCERT HALL ON
CHURCH ON
CATHEDRAL ON
PANORAMA OFF
PARTY OFF
2-CHANNEL OFF
MONO LOGIC ON
MONO SURROUND ON
MONO ON
5.1 FILM ON
5.1 TV ON
5.1 MUSIC ON
5.1 SurEX ON
5.1 MUSIC ON
DIGITAL EX ON
5.1 2-CHANNEL OFF
5.1 MONO LOGIC ON
5.1 MONO SURR ON
5.1 MONO ON
FILM ON
MUSIC ON
ON
MUSIC ON
ON
2-CHAN OFF
5.1a FILM ON
5.1a MUSIC ON
5.1a SurEX ON
5.1a MUSIC OFF
5.1a STANDARD OFF
5.1a 2-CHANNEL OFF
5.1a BYPASS OFF
2CH BYPASS OFF
R
R
ON
OFF
TRIGGER SETUP
TRIGGER 1 REMOTE
TRIGGER 2 REMOTE
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
TRIGGERS
Record Zone during the previous operating session.
TRIGGER SETUP
Selecting the SETUP menu TRIGGERS option prompts the selection of the desired trigger output connector –
1 or 2. The SDP-40 includes three 12V DC trigger output connectors labeled PWR (power), 1, and 2. The power
connector is not configurable. It is activated when the SDP-40 is activated and deactivated when the SDP-40 is
deactivated. The other connectors can be configured for remote or program operation.
Selecting TRIGGER 1 or TRIGGER 2 opens the corresponding TRIGGER SETUP menu, which can be used to configure
the selected trigger output connector. The TRIGGER SETUP menu shown at the right is used as an example. The
parameters on the left side of the TRIGGER SETUP menus are identical regardless of which connector is selected. The
parameter settings on the right side are adjustable. The TRIGGER SETUP menu shown at the right indicates factory-
default parameter settings for TRIGGER 1. The menu shown on the next page indicates default parameter settings
for TRIGGER 2.
Default Possible
Parameter Setting Settings
REMOTE ONLY ON ON, OFF
Program Operation OFF ON, OFF
All TRIGGER SETUP menu parameters – except the REMOTE ONLY parameter – are considered program operation parameters.
. . . TRIGGER SETUP continues on page 3-49
TRIGGERS SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
volume level to the selected value when the Record Zone is
activated. When LAST LVL is selected, the SDP-40 sets Record Zone
volume level to the last volume level that was selected in the