JBL SYNTHESIS SDP-40 - Manual (Page 94)

AUDIO CONTROLS
SDP-40
4-3
BASS -6.0 to +6.0
Controls the amount of low-frequency boost or cut applied to the
Main Zone audio output connectors labeled Front L/R, Center, LFE,
and Subwoofer L/R. The graph shown at the right indicates the
frequency response of all BASS parameter settings.
Note:
When the Shift command bank is activated:
• Pressing the CD button increases the BASS
parameter setting in 0.5dB increments.
• Pressing the TAPE button decreases the BASS
parameter setting in 0.5dB increments.
• Pressing the OSD button sets the BASS, TREBLE,
and TILT EQ parameters to +0.0dB.
BASS AUDIO CONTROLS
10 20 50 100 200 500 1k 2k 5k 10k 20k
Hz
+6.0
+5.5
+5.0
+4.5
+4.0
+3.5
+3.0
+2.5
+2.0
+1.5
+1.0
+0.5
+0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
-3.5
-4.0
-4.5
-5.0
-5.5
-6.0
+0.0
BASS
The BASS parameter controls the amount of low-frequency boost or cut applied to
the Main Zone audio output connectors labeled Front L/R, Center, LFE, and
Subwoofer L/R.