JVC GR-DVP10 - Manual (Page 6)

6
EN
Master Page: Left
How To Use The Audio Cable
When using optional headphones, connect to the
provided Audio cable (with a core filter attached),
then connect the Audio cable to the camcorder. The
core filter reduces interference.
How To Attach The Grip Belt
1) Remove the pad and separate the two straps.
2) Thread one end of the strap g through the eyelet,
then pass the other end through the loop.
3) Repeat the same procedure to attach the strap h
to the other eyelet.
4) Connect the strap g and h and thread the strap
h through the buckle, then adjust the grip.
(
੬ pg. 12)
5) Attach the pad.
Headphones
Audio cable
(provided)
Core filter To (headphones)
h
g
More than 2 cm
GR-DVP10PAL.book Page 6 Tuesday, January 6, 2004 10:55 AM