JL Audio Stealthbox SB-GM-HUMRH2/12W6v2/TN - Manual

➔
➔
➔
➔
Stealthbox ®
I N S T A L L A T I O N G U I D E
S B - G M - H U M R 2 / 1 2 W 6 v 2 , J L AU D I O, I n c 2 0 0 4 S h e e t S K U # 0 1 1 1 8 2 R ev i s i o n 8 / 5 / 2 0 0 4 Pa g e 1
for the
SB-GM-HUMRH2/12W6v2
(2003-Up Hummer H2)
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the project. It
will guide you step by step through the
installation. Several of the steps in this
process may require two people to
accomplish.
It is absolutely vital that the enclosure
be properly mounted to the vehicle
according to these instructions. Failure
to mount the enclosure properly pres-
ents two problems: 1) The sub-bass
performance will suffer due to the
movement of the enclosure caused by
the force exerted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.
Please enjoy your JL Audio Stealthbox
responsibly.
STEP 1: Remove the third “jump” seat. *STEPS 2-4 are for the vehicle that are
equip with the internal spare tire.*
STEP 2: Remove the spare tire
STEP 3: Remove the jack and jack tools.
STEP 4: With an 8mm socket, remove the
four bolts that secure the spare tire rack. STEP 5: By pulling up, remove the driver’s
side rear storage bucket. STEP 6: With a 10mm socket, flat head
screw driver, Phillips® head screw driver and a
T-15 socket.
Remove the driver’s side rear wheel well plas-
tic trim.
START
HERE
Continued on Next Page ➔
w w w . j l a u d i o . c o m
➔
➔