JVC KD-G120 - Manual (Page 9)

ENGLISH
9
Sound adjustments
You can select a preset sound mode suitable to
the music genre (C-EQ: custom equalizer).
Indication (For)
BAS TRE S.BS
(bass) (treble) (super bass)
USER (Flat sound) 00 00 OFF
ROCK
(Rock or disco music)
+03 +01 ON
CLASSIC
(Classical music)
+01 –02 OFF
POPS (Light music) +04 +01 OFF
HIP HOP
(Funk or rap music)
+02 00 ON
JAZZ (Jazz music) +02 +03 OFF
Adjusting the sound
You can adjust the sound characteristics to your
preference.
* 1 Displayed only when “L/O MODE” is set to
“WOOFER” (see page 10).
Indication, [Range]
BAS* 2 (bass), [–06 to +06]
Adjust the bass.
TRE* 2 (treble), [–06 to +06]
Adjust the treble.
FAD* 3 (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL* 4 (balance), [L06 to R06]
Adjust the left and right speaker balance.
Indication, [Range]
S.BS* 2 (super bass), [S.BS ON or S.BS OFF]
[01 to 05]* 5
Maintain the richness and fullness of the bass
sound regardless of how low you set the volume.
SUB. W (subwoofer), [00 to 08]
Adjust the subwoofer output level when a
subwoofer is connected.
VOL (volume), [00 to 30 or 50* 6 ]
Adjust the volume.
* 2 When you adjust the bass, treble, or
super bass the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including “USER.”
* 3 If you are using a two-speaker system, set the
fader level to “00.”
* 4 This adjustment cannot affect the subwoofer
output.
* 5 Range adjustment for super bass is adjustable
only when it is set to “S.BS ON.”
* 6 Depending on the amplifier gain control
setting. (See page 10 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode)
items listed in the table on page 10.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other
PSM items if necessary. Then press
SEL to finish the procedure.
Preset values
To be continued...
EN06-09_KD-G120R_120[J]ff.indd 9 EN06-09_KD-G120R_120[J]ff.indd 9 10/6/05 2:27:21 PM 10/6/05 2:27:21 PM