John Deere OMGX20927 - Manual (Page 10)

Installing - 6
INSTALLING
NOTE: Make sure discharge chute assembly does not
get caught inside mower deck discharge opening.
MX10363 MX10315
3. Position lower discharge chute assembly (F) in front of
mower deck discharge opening (E).
4. Fit tab (C) on lower discharge chute behind hinge (D) of
the chute deflector.
MX10316
5. Insert rod (H) into keyhole (G) on deck, then slide
discharge chute forward, locking rod into place.
6. Hook rubber strap latch (I) over the top of the gage
wheel bracket and insert through hole (J).
MX10382
7. Slide top (K) of upper discharge chute assembly into
hopper top.
8. Slide bottom (O) of upper chute over top (M) of lower
chute, aligning notch (P) with bolt (N).
9. Hook rubber strap latch (L) onto bolt (N) in lower chute.
48-Inch Mower Decks
MX8871
1. Hold plastic discharge chute (A) open.
2. To unlock metal deflector (B), grasp corner, pull outward
and swing upward to open.
3. Position lower discharge chute assembly in front of
mower deck discharge opening.
c
CAUTION: Avoid injury! Prevent possible
thrown objects. The discharge chute assembly
must fit tight against the chute hinge bracket
and completely cover the mower deck
discharge opening.
E
F
D
C
C
D
G
H I
J
K
N
O
P
M
L
A
B