JVC XM-448BK - Manual (Page 12)

10
Number of tracks and total
playing time
Number of tracks and remaining
recording time
Disc title
OR
MODE
Disc title
Number of tracks and
remaining recording time
Number of tracks and
total playing time
Track No. and its playing time
Track title
ON/OFF
DIMMER
Using the display mode
To switch the display information —————————
The display can show the disc title, track title and remaining time (recording time available
when a recordable MD is loaded) information.
When no track is selected (In Stop mode):
Press DISPLAY/CHARACTER on the main unit or MODE on the remote
control unit.
Each press of the button switches the displayed information as follows.
• A disc title composed of more than 11 characters is scrolled, and the
first 11 characters are displayed after scrolling.
• The display shows “NO TITLE” if the disc has no title.
When a track has already been selected (During
playback or in Stop mode):
Press DISPLAY/CHARACTER on the main unit or MODE on the remote
control unit.
Each press of the button switches the displayed information as follows.
• A track title composed of more than 11 characters is scrolled, and the
first 11 characters are displayed after scrolling.
Note: When using the TEXT COMPU LINK remote control system
(see page 31), titles will not be scrolled.
• The display shows “NO TITLE” if the track has no title.
To change the brightness of the display ——————
• You can turn on or off the display by pressing ON/OFF on the remote control unit. Each
press of the button turns on or off the display alternately.
When you turn off the unit, the display-off mode is canceled.
Notes: • When editing MDs or assigning titles (see pages 17 to 29), you cannot turn on
or off the display.
• Even though the display is turned off, it turns on temporarily while you
operate the unit (for example, pause or stop) during play or recording.
• You can dim the display by pressing DIMMER on the remote control unit. Each press
of the button turns the display dim or bright alternately.
Program playback
You can program up to 32 tracks in any desired order including the same tracks.
• You can only make a program in Stop mode.
1 Load an MD.
See “Continuous playback ” on page 8.
EN01-16.XM-448BK[J]/f 99.1.28, 3:25 PM 10