JVC XM-448BK - Manual (Page 7)

5
Setting up the System
Supplied accessories
Before setting up your system make sure you received all of the following supplied
accessories.
Remote control unit (1)
Batteries R03 (UM-4)/AAA (24F) (2)
Audio pin cord (2)
Optical digital cable (1)
Compu Link cable (1)
Text Compu Link cable (1)
AC power cord (1)
Remote control batteries
Match the polarity (+ and –) on the batteries with the + and – markings in the battery
compartment.
CAUTION: Handle batteries properly.
To avoid battery leakage or explosion:
•
Remove batteries when the remote control unit will not be used for a long time.
• When you need to replace the batteries, replace both batteries at the same time with
new ones.
• Do not use an old battery with a new one.
• Do not use different types of batteries together.
Operating the remote control unit
The remote control unit makes it easy to use many of the functions of the system from a
distance of up to 7 m (23 feet) away.
You need to point the remote control unit at the remote sensor on the front panel.
R03 (UM-4)/AAA (24F)
Remote sensor
EN01-16.XM-448BK[J]/f 99.1.28, 3:25 PM 5