JVC KD-LH3105 - Manual (Page 30)

30
ENGLISH
Storing your own sound modes
You can adjust the sound modes to your
preference and store your own adjustments in
memory (USER 1, USER 2, and USER 3).
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
1 again.
1
Press EQ (equalizer).
The last selected sound mode
is called up.
The next-step-operation
buttons start flashing.
2
Select the sound mode you want to
adjust.
3
Enter the sound adjustment mode.
The following sound
mode adjustment
screen appears on the
display.
4
Make adjustments as you like.
1) Press ¢ or 4 to select the
frequency band—60Hz, 150Hz, 400Hz,
1kHz, 2.4kHz, 6kHz, 12kHz.
Ex.: When you select “Country”
2
Press the number button to select
the sound mode you want.
• This unit has two sound mode selection
screens. To move to the other screen,
press
5 (up) or ∞ (down).
To cancel the sound mode, select “FLAT” in
step
2.
Note:
For details about the preset settings of each sound
mode, see page 56.
To exit from the sound mode selection
screen, press EQ (equalizer) repeatedly or wait
for about 5 seconds.
Press 5 (up) or
∞ (down).
Ex.: When you press number button 1 to
select “Country”
EN28-31_KD-LH3105[U]f.p65 2/19/03, 4:18 PM 30