Troubleshooting, English – JVC KD-LH3105 User Manual

Page 57

Advertising
background image

57

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service
center.

Remedies

Adjust it to the optimum level.

Check the cords and connections.

Press the reset button on the
panel holder after detaching the
control panel. (The clock setting
and preset stations stored in
memory are erased.)
(See page 2.)

Remove the control panel, wipe
the connectors, then attach it
again. (See page 47.)

Store stations manually.

Connect the antenna firmly.

Insert the disc correctly.

• Insert a finalized CD-R/

CD-RW.

• Finalize the CD-R/CD-RW

with the component which
you used for recording.

Unlock the disc. (See page 19.)

While holding CD/CD-CH (LINE),
press SEL for more than 2
seconds to eject the disc.

Stop playback while driving on
rough roads.

Change the disc.

Check the cords and
connections.

Insert a disc into the loading
slot.

Insert the disc correctly.

Causes

The volume level is set to the
minimum level.

Connections are incorrect.

The built-in microcomputer may
have functioned incorrectly due
to noise, etc.

The control panel is not attach
correctly and firmly.

Signals are too weak.

The antenna is not connected
firmly.

Disc is inserted upside down.

CD-R/CD-RW is not finalized.

Disc is locked.

The CD player may function
incorrectly.

You are driving on rough roads.

Disc is scratched.

Connections are incorrect.

No disc in the loading slot.

Disc is inserted incorrectly.

Symptoms

• Sound cannot be heard

from the speakers.

• This unit does not work

at all.

• “Panel Connect Error”

appears on the display.

• SSM (Strong-station

Sequential Memory)
automatic preset does
not work.

• Static noise while

listening to the radio.

• Disc cannot be played back.

• CD-R/CD-RW cannot be

played back.

• Tracks on the CD-R/

CD-RW cannot be
skipped.

• Disc cannot be ejected.

• Disc cannot be recognised

(“No Disc,” “Loading Error,”
or “Eject Error” flashes on
the display.)

• Disc sound is sometimes

interrupted.

• “No Disc” flashes on the

display.

Disc Pla

ybac

k

General

FM/AM

EN56-61_KD-LH3105[U]f.p65

2/21/03, 6:03 PM

57

Advertising