JVC KD-LH3105 - Manual (Page 38)

38
ENGLISH
Selecting a still image for graphic
display—User Picture
You cannot select “UserPict.” as a PSM item in
the following cases:
• If no image is stored in “Picture,” or
• “UserPict.” is not selected for the “Graphics”
setting (see the left column),
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 39 and 40.)
2
Press number button 1 to select
“MOVIE”—Movie category of the
PSM settings.
The “Graphics” setting screen appears on
the display.
3
Select “UserPict.”
File name of the
current selected image
also appears.
4
Select a file you want.
5
Finish the setting.
2
Press number button 1 to select
“MOVIE”—Movie category of the
PSM settings.
The “Graphics” setting screen appears on
the display.
3
Select “UserMovie,” “UserSlide,” or
“UserPict.”
• UserMovie: Your edited animation stored
in “Movie” is activated as your
graphic screen.
• UserSlide: Your edited still images stored
in “Picture” are activated and
shown in sequence as your
graphic screen.
• UserPict.: One of your edited still image
stored in “Picture” is activated
as your graphic screen.
Select one of the stored
images (see the next column).
4
Finish the setting.
To cancel all graphic displays, select “Off” in
step
3.
Note:
For the “Graphics” setting, you can also select “All
Demo,” “Int Demo,” and “ImageLink.”
– See pages 8 and 41 for “All Demo” and “Int Demo.”
– See pages 23 and 41 for “ImageLink.”
Ex.: When you select
“UserPict.”
EN32-38_KD-LH3105[U]f.p65 2/18/03, 4:36 PM 38