JAI VIS-CAM System TS-1327EN - Manual (Page 36)

VIS-CAM System
24 Installing the Vehicle Imaging Subsystem
Figure 20. VIS CAM connections.
3.3.2 X3, X7 Traffic Light Sensor
The Traffic Light Sensor TLS-300 connection to the J-Panel is shown in Table 4 and Figure 21.
Table 4 TLS 300 to J-Panel connections.
X3 Pin X Signal Description Connection to Light Sensor Cable wire color
1 +24V dc Power output Yellow
2 Gnd Power return White
3 D0+ RS485 databus D0+ White/orange
4 D0- RS485 databus D0- Orange
5 D1+ RS485 databus D1+ White/brown
6 D1- RS485 databus D1- Brown
X7 Pin X
1 Heater +24V dc Power output Red/blue and Blue/red
2 Heater gnd Power return White/green and Green