JAI VIS-CAM System TS-1327EN - Manual (Page 72)

VIS-CAM System
60 Appendix A: Camera Functional & Connector Description
5.6.4 Connector physical Interface
Ethernet test connections.
Pin Signal Description Connection to Remarks
1 A+ (wh/org) Ethernet A+ Gigabit switch Connected when testing
2 A- (org) Ethernet A- Gigabit switch Connected when testing
3 B+ (wht/grn) Ethernet B+ Gigabit switch Connected when testing
4 Nu (wht/blu) Not used — —
5 Nu (blu) Not used — —
6 B- (grn) Ethernet B- Gigabit switch Connected when testing
7 Nu (wht/brn) Not used — —
8 Nu (brn) Not used — —
5.6.5 Test setup 1
The test setup for communication with the EN Camera and the network is shown in Figure 60. The
patch cables can be twisted or not twisted.
Figure 60. EN network test configuration setup.
The test setup does not work properly with a gigabit ethernet switch.