JBM electronic C-130 - Manual (Page 6)

Page -6-
Copyright
©2007 JBM Electronics, Inc.
NOTE: The screens and instructions displayed are based on Windows XP. Your system
may be different. If you have any problems contact your system admin.
• Scroll down to the bottom of the following items and select “Internet Protocol
(TCP/IP)” (as shown to the left).
METHOD 1: PC to ETH0
• Select “Use the following IP address” and fill in the blank fields with the
information below:
•
IP address: 192.168.0.2
• Subnet mask:
255.255.255.0
• Default gatewa:y
192.168.0.1
• Preferred DNS:
192.168.0.1
• Click “OK”
• The previous screen will appear Click “OK”