JVC 0199MNV*UN*SW - Manual (Page 18)

18
1 PRESS INPUT SELECT TO SELECT INPUT
MODE
•Press INPUT SELECT to select the appropriate
input mode depending on the connector being
used, referring to the indication shown on the
TV screen or the relevant lamps on the printer.
(See Input Mode Selection below.)
When using the DV IN connector, select DV.
When using the S or VIDEO INPUT connector,
select VIDEO.
Pressing the button cycles through the input
modes as follows:
•If you select DV when a source unit is connected
to the printer’s VIDEO INPUT connector, the
picture input from the VIDEO INPUT connector
appears on the screen.
This section explains how to print a single image
from a digital camcorder or an S-VHS VCR con-
nected to the printer via a cable.
Preparation
See page 12.
PRINTING FROM A DIGITAL CAMCORDER/S-VHS VCR (CABLE CONNECTION)
DV IrDA (INFRARED) VIDEO
PC MODE PICTURE MEMORY
Input Mode
DV mode
IrDA (INFRARED)
mode
VIDEO mode
PC MODE
Connector
DV IN connector
IrDA (IrTran-P) sensor
S INPUT/VIDEO INPUT
connector
PC connector
Image Source
Digital camcorder
IrTran-P compatible digital still camera
Computer (Infrared Communications
Driver Ver 2.0 compatible)
VCR, camcorder
Computer
Input Mode Selection
The video data input mode you need depends on the image source and connection you use.
DV