JVC 0199MNV*UN*SW - Manual (Page 20)

20
PRINTING FROM A DIGITAL STILL CAMERA [IrDA (IrTran-P) RECEPTION]
This section explains how to print an image
transmitted from an IrDA (IrTran-P) compatible
digital still camera using infrared communication.
Preparation
See page 12.
When using a digital still camera compatible with IrTran-P,
refer also to the instruction manual provided with the
camera.
1 PRESS INPUT SELECT TO SELECT IrDA
MODE
•If you select IrDA (INFRARED) when a source
unit is connected to the printer’s VIDEO INPUT
connector, the picture input from the VIDEO
INPUT connector appears on the screen.
2 TRANSMIT THE PICTURE IN THE
CAMERA TO THE PRINTER
•Aim the digital still camera’s IrDA (IrTran-P)
transmitter at the printer’s IrDA (IrTran-P) sensor.
•The picture data is sent from the digital still
camera to the printer.
•The IrDA lamp blinks while the video data are
being transmitted to the printer, and RECEIVING
TRANSMISSION appears on the screen.
3 WHEN THE PRINT LAMP LIGHTS,
PRESS PRINT TO START PRINTING
IrDA
(INFRARED)