JVC 0199MNV*UN*SW - Manual (Page 32)

32
DIFFERENT TYPES OF PRINTING (cont.)
FRAME IMPOSE
Seven different frames are stored in the printer and can
be called up for superimposed printing.
Preparation
● See page 12.
● Press INPUT SELECT to select the appropriate input mode
depending on the connection to the source unit (
੬
page 18).
1 BEGIN SOURCE PLAYBACK
2 1 PRESS MEMORY WHEN THE
DESIRED IMAGE APPEARS
•If the image is unstable, press
MEMORY again.
2 PRESS OK
3 PRESS MENU
4 PRESS CURSOR TO SELECT
FRAME,
THEN
PRESS OK
•If IrDA (INFRARED) or PC MODE is selected, you do not have to perform steps 1 and 2. Refer to page
20 or 38 to send the image you want to print to the printer.
● If you want to print a different image…
Follow the instructions below to erase the frame before printing.
1 Perform steps 3 – 6 described above, selecting the blank frame in the upper left corner
of the screen in step 5.
2 Press SOURCE/STORED IMAGE to switch back to the input display.
The frame is now erased.
5 PRESS CURSOR TO SELECT
THE
DESIRED
FRAME
6 PRESS OK
•The image appears on screen with the
selected frame superimposed on it.
•If you want to cancel and try again,
press MENU.
7 PRESS OK
•If you also want to superimpose one of
the stored titles on the image, perform
steps
3 – 7 on page 31.
8 PRESS PRINT TO START
PRINTING
MENU 2 2/2
EFFECT
TITLE
FRAME
QUALITY
: ૽ STD HIGH
PICTURE MEMORY
TO MENU 1 [ ]
ITEM [ / ]
OK [OK]
SELECT [ / ] QUIT [MENU]
SEL [ / ]
OK [OK]
QUIT
[MENU]