JVC CH-X100 - Manual (Page 16)

16
ENGLISH
AUDIO2 AUDIO1
OFF
3
Select the desired mode—“AUDIO 1,”
“AUDIO 2” or “OFF.”
4
Finish the setting.
Selecting the level display
—LEVEL
You can select the level display according to your
preference.
When shipped from the factory, “AUDIO2” is
selected.
• AUDIO1: Level meter illuminates.
• AUDIO2: Alternates level meter and
illumination display.
• OFF: Erases the audio level indicator.
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H”, “CLOCK M”, “LEVEL”, “B. SKIP”,
or “EXT IN*” appears on the display.
* Displayed only when one of
the following sources is
selected — FM, AM and
Tape.
2
Select “LEVEL” if not shown on the
display.
CLOCK H CLOCK M
LEVEL
EXT IN
B. SKIP
EN15-18.KS-FX621[U] f 12/12/02, 7:42 PM 16