John Lewis JLBICM 01 - Manual (Page 21)

19
Steam - Heating liquids
• The steam/water pipe can be moved to the back of the cabinet when not in use.
Pull forward when required.
CAUTION:
Do not touch when HOT!
• Press the steam control and the corresponding indicator blinks for 20 seconds.
The machine will be ready to make steam when the indicator stops blinking and remains lit.
• Place a jug with the liquid to be heated under the steam nozzle.
• Press and hold the start control within 10 seconds and wait for the steam function to commence.
CAUTION:
the desired function will be disabled if the start control is not pressed within 10 seconds. It will then be necessary to
repeat the procedure.
• The steam will continue to spray till the start control is released.
MILK FOR CAPPUCCINO: Put some cold milk (100cc min.) in a deep jug and heat it using steam. Agitate the milk jug a little
and wait until the foam is ready (one minute min.). To improve the result gently beat a little the jug on the table after that
the foam is ready.