John Lewis JLBICM 01 User Manual
Page 22
20
Programming the amount of coffee
beans to be grinded
• This espresso machine has already been calibrated in factory to dispense the ideal measure of ground coffee for
one cup of espresso.
• However this quantity of ground coffee can be increased or reduced, then the selected measure is stored. The
programmable measure of ground coffee refers to both the espresso selection and to regular coffee selection.
• Put the machine on stand-by mode as described.
• Keep the start control pressed for 10 seconds.
• Some LEDS will flash, working as indicators, (the more are the LEDS illuminated the greater the quantity of coffee).
Before adjusting make a note of the original setting so that the machine can be reset to the factory settings if
required.
• To increase or decrease the quantity of ground coffee just press the „espresso‰ control to decrease and „regular
coffee‰ control to increase.