John Lewis JLBICM 01 - Manual (Page 25)

23
If you wish to reset the standard
values
Resetting standard values
• This coffee machine is calibrated in the factory to make the optimum Italian espresso, the values set for the espresso
coffee distribute 30 cc, the values set for the regular coffee is 80 cc.
• if the standard values have to be reset From the stand-by control switch on the machine then press both the on/off and
hot-water controls at the same time for 5 seconds.
• All the LEDs will briefly illuminate to indicate the factory values have been reset.
• Press the ON/OFF control. Each selection will use the factory values.
N.B.: Only the quantity of water required for each cup of coffee is reset. The measures of ground coffee will not alter.