Jensen JiMS-182 - Manual (Page 12)

12
Symptom Possible Cause Solution
Radio
Station is not tuned properly
for AM or FM. Fine-tune the AM or FM
broadcast station.
FM: The broadcast station
signal is weak
Find another station or
relocate the unit until the
best reception is obtained.
Noise or sound distorted
on AM or FM
broadcasting.
AM: The location of the built-in
antenna is not correct.
Remove your iPod and
rotate the unit until the best
reception is obtained.
Unit is not in RADIO function
mode Press the FUNC. Button
repeatedly to select the
RADIO mode. AM or FM no sound
Volume is at minimum Increase Volume level
iPod
Unit is not in iPod mode Press the FUNC. Button to
select iPod mode. iPod will not play
iPod is not inserted properly Re-insert iPod again
Alarm
Alarm is not activated Check that Alarm indicator
“
” or “ ” , “ ” or “ ”
“ ” or “ ” appears in the
Display.
No Alarm
Incorrect Alarm time Make sure AM or PM is set
correctly.
Abnormal Operation
Clock, iPod, Radio or
AUX IN not functioning
Internal micro controller needs
to be reset Remove all the batteries
(including backup battery
CR2025), disconnect the AC
adaptor and wait a few
seconds for the built-in
micro controller to reset.
Abnormal or no display Internal micro controller needs
to be reset
Remove all the batteries
(including backup battery
CR2025), disconnect the AC
adaptor and wait a few
seconds for the built-in
micro controller to reset.
SPECIFICATIONS
GENERAL
Power source --------------------------------- DC 6V 2000mA AC adapter (Included)
DC 6V, “AA” size (UM-3) battery x 4 (Not