Jensen JiMS-182 User Manual

Page 9

Advertising
background image

9

1. To set the wakeup time, press and hold the ALM.1 / MEM- or ALM.2 / MEM+

Button for approximately 3 seconds until the hour digit blinks.
While the hour digit blinks, press

or

button to adjust your desired hour

digit.

Note: For the 12 Hour format, Make sure the Hour is set so that AM or PM is

correctly displayed.

2. Press

ALM.1 / MEM- or ALM.2 / MEM+ button to save the

hour setting, the minute digit will blink.

3. While the minute digits blink, press

or

button to adjust

your desired minute digit.

4. Press

ALM.1 / MEM- or ALM.2 / MEM+ button to save the wakeup setting.

Setting Wakeup Mode
Press ALM.1 / MEM- or ALM.M2 / MEM+ Button repeatedly to select the desired
wake up mode (wake to Alarm, RADIO or iPod) for alarm 1 or alarm 2.

1. Wake to Alarm

- Repeatedly

press

ALM.1 / MEM- or ALM.2 / MEM+ Button to enter ALARM

mode. “

” or “

” will appear in the display. Two different rings for Alarm 1

and Alarm 2 will sound when the alarm time is reached.

2. Wake to Radio

- Repeatedly

press

ALM.1 /MEM- or ALM.2 / MEM+ Button to enter the

RADIO mode, “ ” or “ ” will appear in the display.

-

Follow the procedure in “TUNER OPERATION” to select your desired radio

station.

- Press

the

POWER/STANDBY Button to turn off the unit. The radio will

automatically turn on when the alarm time is reached.

3. Wake to iPod

- Briefly

press

ALM.1 / MEM- or ALM.2 / MEM+ Button to select iPod mode,

“ ” or “ ” will appear in the display.

-

Follow the procedure in “DOCKING YOUR iPOD” to play your iPod.

- Press

POWER/STANDBY Button to turn the unit off. When the alarm

time is reached, the iPod will automatically start playing.

Note:

i.

After waking to iPod or Radio alarm, the volume level of the iPod or radio
can be adjusted as needed.

ii.

After the alarm is on, the LCD backlight will automatically be set to high.

4. Light

-

The light located on the top of the JiMS-182 works with all “Wake to”
settings. The light will begin to light one minute before the alarm time is
reached and will increase to full brightness by the time the alarm time is
reached.

Advertising