JVC KD-LHX601 User Manual

Page 13

Advertising
background image

13

ENGLISH

Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number buttons
—No.1 (lowest frequency) to No.6 (highest
frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.

Manual preset

You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.

Ex.: Storing FM station of 92.5 MHz into the

preset number 1 of the FM1 band.

1

Select the FM/AM tuner.

Each time you press and hold
the button, the FM/AM tuner
and the DAB tuner are
alternately selected.

2

Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).

Each time you press the button,
the band changes as follows:

3

Tune in to a station (in this example,
of 92.5 MHz).

To tune in to stations
of higher frequencies

To tune in to stations of lower frequencies

4

Press and hold the number button
(in this example, 1) for more than
2 seconds.

The display pattern automatically changes
to the small animation display (see page
15).

5

Repeat the above procedure to store
other stations into other preset
numbers.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset
the stations again.

FM1

FM2

FM3

AM

After about

5 seconds

Preset number appears.

EN10-15_KD-LHX601[E_EX].p65

04.1.15, 2:29 PM

13

Advertising