JVC KD-LHX601 - Manual (Page 25)

25
ENGLISH
Storing DAB services in
memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2, and DAB3) manually.
1
Select the DAB tuner.
Each time you press and hold
the button, the DAB tuner and
the FM/AM tuner are
alternately selected.
2
Select the DAB band (DAB1, DAB2,
or DAB3) you want.
Each time you press the
button, the DAB band changes
as follows:
3
Tune in to an ensemble you want.
4
Select a service of the ensemble you
want to listen to.
To select the next service.
To select the previous service.
DAB1 DAB2 DAB3
5
Press and hold the number button
(in this example, 1) you want to store
the selected service into for more
than 2 seconds.
The display pattern automatically changes
to the non-animation display and the preset
number flashes (then the previous display
pattern resumes).
6
Repeat the above procedure to store
other DAB services into other preset
numbers.
Notes:
• You can only preset primary DAB services. If you
store a secondary service, its primary service will
be stored instead.
• A previously preset DAB service is erased when a
new DAB service is stored in the same preset
number.
Tuning in to a preset DAB
service
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
you have not stored them yet, see “Storing DAB
services in memory” on the left column.
1
Select the DAB tuner.
Each time you press and hold
the button, the DAB tuner and
the FM/AM tuner are
alternately selected.
CONTINUED ON THE NEXT PAGE
EN23-30_KD-LHX601[E_EX].p65 04.1.15, 2:31 PM 25