John Deere PR-G7500M - Manual (Page 24)

24 Operator’s Manual
SERVICE
MAINTENANCE
PERIODIC MAINTENANCE CHART:
To ensure satisfactory operation over an extended pe-
riod of time, an engine requires normal maintenance at
regular intervals. The Periodic Maintenance Chart below
shows periodic inspection and maintenance items and
suitable intervals. The bullet mark designates that the
corresponding item should be performed at that interval.
NOTE: Some adjustments require the use of special tools or other
equipment. An electronic tachometer will facilitate setting
idle and running speeds.
Daily Every Every Every Before
25hrs. 100 hrs. 200 hrs. Storage
Check fuel •
Check engine oil •
Check for loose or lost nuts and bolts •
Check for leaks •
Check cylinder and head fins for
dust and dirt •
Check battery electrolyte level •
Check fuel lines (replace if necessary) •
Clean air cleaner foam element (**) •
Tighten nuts and bolts (*) •
Change engine oil (*) •
Clean fuel filter •
Replace air cleaner paper element (**) •
Clean dust and dirt from
cylinder and cylinder head fins (**) •
Clean and regap spark plug •
Add fuel stabilizer •
Run unit dry •
* Perform these operations after the first 5 hours of use, then at the recommended intervals.
** Service more frequently under dusty conditions.
NOTE: These items must be performed with the proper tools. See your John Deere Customer Service Representative for service, unless
you have the proper equipment and mechanical proficiency.