JVC 0803-CR-JMT - Manual (Page 18)

18
HV-34LH21/34LH51/34LH71/29WH21/29WH51/29WH71/29VH21 / GGT0020-001A-H / English
Remote control buttons and functions
„ Freeze function
[Except HV-34LH21/HV-29WH21/
HV-29VH21]
While watching a picture, you can capture a
still picture you want. The captured still
picture and the moving picture are
displayed at a time. (They are the pictures
of the same source.)
Press the (Freeze) button.
Still picture is captured and displayed on the
right side of the screen. On the left, the
moving picture is displayed.
• The (Freeze) button does not work
in the Text mode.
To return to the normal screen:
Press the
(Freeze) button again or
press the number buttons to choose a
channel.
• You cannot use the FREEZE button
when the sub picture or the main
picture are displayed on the screen.
• If the current channel is guarded with
the CHANNEL GUARD function and
the screen is blue, this button does not
work.
• If you press the FREEZE button when
receiving the Progressive video signal
(525P signal), "525P" appears on the
screen and the FREEZE function does
not operate.
„ Strobe function
[Except HV-34LH21/HV-29WH21/
HV-29VH21]
You can display eight consecutive still
pictures and one moving picture at a time.
(They are the pictures of the same source.)
Press the STROBE button.
Eight consecutive still pictures which are
captured at intervals of about 0.2 second
are displayed in the order of “1” to “9”.
(These numbers are not actually displayed.)
• The STROBE button does not work in
the Text mode.
To return to the normal screen:
Press the STROBE button again or press
the number buttons to choose a channel.
• If signal level of the main picture is
weak, the still images become
abnormal.
• You cannot use the STROBE button
when the sub picture or the main
picture are displayed on.
• If the current channel is guarded with
the CHANNEL GUARD function and
the screen is blue, the STROBE button
does not work.
• If you press the STROBE button when
receiving the Progressive video signal
(525P signal), "525P" appears on the
screen and the STROBE function does
not operate.
Moving
picture
Still
picture
HV-34LH&29WH_Eng.book.fm Page 18 Monday, September 1, 2003 7:59 PM