JVC 0803-CR-JMT - Manual (Page 4)

4
HV-34LH21/34LH51/34LH71/29WH21/29WH51/29WH71/29VH21 / GGT0020-001A-H / English
Setting up your TV
2 Connecting the power cord
Connect the mains plug to the AC outlet.
3 Putting the batteries into the
remote control
Use two AA/R6 batteries.
Insert the batteries from the - end, making
sure the + and - polarities are correct.
• Follow the warnings printed on the
batteries.
• If the remote control does not work
properly, replace the batteries.
• The batteries we supply are only for
setting up and testing your TV. Please
replace them as soon as necessary.
4 Making the initial settings
When the TV is first turned on, it enters the
initial setting mode, and the JVC logo is
displayed.
1 Press the main power button on the
TV.
The TV is turned on, and the JVC logo
appears.
• If the POWER lamp on the TV lights
red and does not change to green,
your TV is in the standby mode. Press
the POWER button on the remote
control to turn the TV on.
• If the JVC logo does not appear, your
TV has already been turned before. In
this case, use the “LANGUAGE” and
“AUTO PROGRAM” functions to make
the initial settings. For details, see
“INSTALL menu” on page 29.
2 Press the MENU/OK button.
The LANGUAGE menu appears. You
can choose a language for the on-screen
language.
POWER
HV-34LH21 / HV-34LH51 /
HV-34LH71
POWER
HV-29WH21 / HV-29WH51 /
HV-29WH71 / HV-29VH21
POWER lamp
Main power button
POWER lamp
Main power button
HV-34LH&29WH_Eng.book.fm Page 4 Monday, September 1, 2003 7:59 PM