John Deere ET-3103-J - Manual (Page 16)

16 Cordless Impact Wrench Operator's Manual
Operation
OPERATION (CONTINUED):
3. Using as an auxiliary light:
a. Press the switch to turn off the light.
If forgotten, the light will turn off automatically after
15 minutes.
b. The direction of the light can be adjusted within the
range of hook positions 1 - 5. (Fig. 9)
Lighting time
AAAA manganese batteries: approx. 15 hrs.
AAAA alkali batteries: approx. 30 hrs.
CAUTION: DO NOT LOOK DIRECTLY INTO THE
LIGHT. SUCH ACTIONS COULD
RESULT IN EYE INJURY.
4. Replacing the batteries:
a. Loosen the hook screw with a phillips-head
screwdriver (No. 1). (Fig. 10)
Remove the hook cover by pushing in the direction
of the arrow. (Fig. 11)
b. Remove the old batteries and insert the new
batteries. Align with the hook indications and position
the plus (+) and minus (-) terminals correctly.
(Fig. 12)
c. Align the indentation in the hook main body with the
protuberance of the hook cover, press the hook
cover in the direction opposite to that of the arrow
shown in Fig. 11 and then tighten the screw.
Use commercially available AAAA batteries (1.5 V).
NOTE: Do not tighten the screw excessively. Such action
could strip the screw threads.
CAUTION: FAILURE TO OBSERVE THE
FOLLOW ING CAN RESULT IN
BATTERY LEAKAGE, RUST OR
MALFUNCTION.
POSITION THE PLUS (+) AND MINUS (-)
(Fig. 9)
(Fig. 10)
(Fig. 11)
TERMINALS CORRECTLY. REPLACE BOTH BATTERIES AT THE
SAME TIME. DO NOT MIX OLD AND NEW BATTERIES.
REMOVE EXHAUSTED BATTERIES FROM THE HOOK
IMMEDIATELY.
DO NOT DISCARD BATTERIES TOGETHER WITH NORMAL
TRASH AND DO NOT THROW BATTERIES INTO FIRE.
STORE BATTERIES OUT OF THE REACH OF CHILDREN.
USE BATTERIES CORRECTLY IN ACCORDANCE WITH THE
BATTERY SPECIFICATIONS AND INDICATIONS.
(Fig. 12)