JVC KD-S37 - Manual (Page 10)

10 ENGLISH
Listening to the USB device
This unit can play MP3/WMA files stored on a USB mass storage class device.
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player,
etc. to the unit.
• You can also connect an Apple iPod/iPhone to the USB input jack. For details of the operations,
20 – 21.
~
] Turn on the power.
Ÿ
All tracks will be played repeatedly until you change the
source or detach the USB device.
Caution on volume setting:
USB devices produce very little noise compared
with other sources. Lower the volume before
playing a USB to avoid damaging the speakers
by sudden increase of the output level.
If you have turned off the power (without
detaching the USB device)...
Pressing / SOURCE turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
USB input jack
USB memory
Changing the display information
Disc title/Album name/performer (folder
name)*
= Track title (file name)* = Current
track number with the elapsed playing time
= Current track number with the clock
time
= (back to the beginning)
* If the current disc is an audio CD, “NO NAME”
appears.
If an MP3/WMA file does not have Tag information
or <TAG DISPLAY> is set to <TAG OFF> ( 25),
folder name and file name appear.
Using the remote controller
5 U / D ∞ : Selects folder of the
MP3/WMA
2 R / F 3 : Selects track
2 R / F 3
[Hold]
: Fast-forwards or
reverses the track
Stop playing and detaching the
USB device
Straightly pull it out from the unit.
“NO USB” appears. Press / SOURCE to listen to
another playback source.
You can operate the USB device in the same
way you operate the files on a disc. (
9)
EN10-23_KD-S37[J]_1.indd 10 EN10-23_KD-S37[J]_1.indd 10 5/19/10 10:36:22 AM 5/19/10 10:36:22 AM