JVC KD-S37 - Manual (Page 19)

19 ENGLISH
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available
before activation.
1
] “XM”
XMDirect ™ Tuner Box or XMDirect2
Tuner System starts updating all the
XM channels. “Channel 1” is tuned in
automatically.
2 Check your XM Satellite radio ID labelled
on the casing of the XMDirect™ Tuner
Box or XMDirect2 Tuner System, or tune
in to “Channel 0”. (
right column)
3 Contact XM Satellite radio on
the internet at <http://xmradio.
com/activation/> to activate your
subscription, or you can call 1-800-XM-
RADIO (1-800-967-2346).
• Once completed, the unit tunes in to
one of the available channels (Channel
4 or higher).
Storing channels in memory
You can preset up to 18 channels for both
SIRIUS and XM.
Ex.: Storing channel into preset number “04.”
1 Tune in to a channel you want to store.
(Steps ~ – !,
18.)
2
“PRESET MODE” flashes.
3
] Select preset number “04.”
“P04” flashes.
Selecting SIRIUS/XM preset
station
1
2
Checking the satellite radio ID
While selecting “SIRIUS” or “XM”...
] Select “Channel 0.”
SIRIUS: SIRIUS identification number is
displayed after “Channel 0” is selected.
XM: The display alternately shows “RADIO ID”
and the 8-digit (alphanumeric) ID number.
To cancel the ID number display, select any
channel other than “Channel 0.”
Changing the display information
Category name
= Channel name
= Artist name = Composer
name *
= Song/program name/
title
= Clock = (back to the
beginning)
* Only for SIRIUS Satellite radio.
Using the remote controller
5 U / D ∞ : Changes the
categories
2 R / F 3 : Changes the channels
2 R / F 3
[Hold]
: Changes the channels
rapidly
[Hold]
EN10-23_KD-S37[J]_1.indd 19 EN10-23_KD-S37[J]_1.indd 19 5/19/10 10:36:24 AM 5/19/10 10:36:24 AM