JVC KD-S37 User Manual

Page 38

Advertising
background image

38

ENGLISH

Symptom

Remedy/Cause

USB device playback

Noise is generated.

The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)

“READING” keeps flashing on
the display.

• Readout time varies depending on the USB device.
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Reattach the USB device again.

“NO FILE” appears on the
display.

Check whether the selected folder, the connected USB
device, or the iPod/iPhone contains a playable file.

“NOT SUPPORT” appears on the
display and track skips.

Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.

Tracks/folders are not played
back in the order you have
intended.

The playback order is determined by the write-in time
stamp. The first track/folder written into the USB device
will be the first track/folder for playback.

• “CANNOT PLAY” flashes on

the display.

• “NO USB” appears on the

display.

• The unit cannot detect the

USB device.

• Attach a USB device that contains tracks encoded in

an appropriate format.

• Reattach the USB device again.

While playing a track, sound is
sometimes interrupted.

The MP3/WMA tracks have not been properly copied
into the USB device.
Copy MP3/WMA tracks again into the USB device, and
try again.

Correct characters are not
displayed (e.g. album name).

This unit can only display letters (upper case),
numbers, and a limited number of symbols. (

8)

Bluetooth

*

2

Bluetooth device does not
detect the unit.

The unit can be connected with one Bluetooth mobile
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.

The unit does not detect the
Bluetooth device.

• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device

detects the unit, select “OPEN” on the unit to connect
the device. (

11)

*

2

For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.

EN34-43_KD-S37[J]_1.indd 38

EN34-43_KD-S37[J]_1.indd 38

5/19/10 10:35:57 AM

5/19/10 10:35:57 AM

Advertising
This manual is related to the following products: