Installing the microphone – Jensen BT380 User Manual
Page 14
2. Installation
s
Installing the Microphone
Before installing the microphone, take note of the following:
Make sure that the cable can reach from the microphone to the junction
box. If the cable is too short, relocate the microphone. Do not lengthen the
cable.
The supplied microphone is uni-directional. For best results, place the
microphone in front of the person talking. We recommend on the A-Pillar. It
has a reception angle of 60 degrees, and is most effective within a 60-cm
radius.
Installing the Microphone
Find a suitable place for the microphone. Remove dust and grease from the
surface.
1.
Remove the protective
cover from the Velcro and
press it firmly onto the
bottom of the microphone.
2.
Remove the protective
cover from the other Velcro
pad and firmly press the
pad in place.
3.
Attach the microphone.
10