Jensen BT380 - Manual (Page 19)

3. Operation
have selected the telephone number, press the Answer button to call the
telephone number you have just entered.
Dial Number
Settings
1 2 3 4 5 6 7 8
0286655757
Voice Tag Activation
User can use phone’s voice command function via the BT380:
Press the Reject/End button on remote control for more than 3 seconds and
when you hear the voice activation sound speak the name to the microphone
and wait for phone to dial. Please note for some phones users are required to
pre-record the voice tag and attach to the entry before using this function.
Initiating Private Calls
A privacy function is available in the BT380 car kit. The handsfree feature is
disabled when the privacy function is enabled allowing for the use of the
handset during the conversation.
To initiate the private call function, simultaneously press both scroll buttons
on the remote control during a call. Once activated, press the Answer button
once to return to handsfree.
r Connection Settings
Pairing Setup
The majority of the phones can connect with BT380 under the hands-free
profile as follows:
Settings → Bluetooth Setup → Pairing a Device → Pairing
Phone
It is possible that some phones do not support the hands-free profile but
instead offer a headset profile. In this case, you will need to setup the headset
pairing to connect the mobile phone with BT380 as follows:
Settings → Bluetooth Setup →Pairing a Device → Pairing
Headset
Disconnecting From the Current Phone
NOKIA 6230I
Disconn Exit
You can disconnect the phone from
the BT380’s menu:
Settings → Bluetooth Setup →
Active Device → Disconn
Viewing, Connecting, and Deleting (Previously Paired Phones)
You can re-establish a connection with a previously paired phone by entering
the paired phone lists:
15