Jensen BT380 - Manual (Page 16)

3. Operation
Please select this item to pair and enter 1234 when prompted by the
password request. This will allow BT380’s device name to reside in the
mobile phone memory, listed along with other previously paired devices in the
handset.
You then need to press the connect command on the phone to establish the
connection with BT380 and your mobile phone name should appear on the
main idle screen.
You will also get battery and signal indications if your phone supports these
functions.
Note:
Please contact your dealer for a compatibility list.
p Dialing the First Call
Scroll up and down until the cursor is on Dial Number then press Enter to
display the menu. Scroll up and down to select your number. Press Enter to
accept the number.
Dial Number
Settings
1 2 3 4 5 6 7 8
0286655757
Once you have finished selecting the telephone number, press the Answer
button to call the number you have just entered.
Receiving and Ending a Phone Call
When there is an incoming call, press the Answer button to accept the phone
call. To end a call, press the Reject/ End button to terminate the
conversation.
Adjusting the Conversation Volume
User can adjust the volume during the conversation by pressing the up and
down scroll button on the remote.
q Advanced Operation
Phonebook Functions 1 – Updating Phonebook
Phonebook
Call History
There are a number of ways to upload your phonebook to the BT380. If your
mobile phone supports automatic phonebook synchronization (for example,
12