JVC DynaPix HD-56ZR7J - Manual (Page 10)

8
CH 28
>> AUTO PROGRAM
14%
> COUNTRY
DOWNLOAD TV RECORDING DEVICE
T-V LINK
> LANGUAGE
>EDIT
01 AV PR
02
03
04
05
06
07
08
09
ID CH
BBC1
BBC2
ITV
CH4
CH5
CH 21
CH 22 CH 23 CH 24 CH 25
CH 26 CH 27 CH 28
Initial settings
Set the menu language, installation location and automatically register the TV channels.
These channels can be edited later in “Editing channels” (P. 9).
(Channel data on the TV can be sent to a connected recording device that is compatible with T-V LINK.)
To the previous screen
If the “JVC” logo does not appear or
if you wish to make changes later
“LANGUAGE” and “AUTO PROGRAM”
(P. 17)
Exit
MENU
BACK
TV
What is “T-V LINK”?
Connecting the TV to a T-V LINK
compatible device allows :
“T-V LINK” (JVC) “Q-LINK” (Panasonic)
“Megalogic” (Grundig) “Data Logic” (Metz)
“SMARTLINK” (Sony) “Easy Link” (Philips)
T-V LINK variations
Channels on the TV to be instantly
registered on the device.
The “DIRECT REC” function to
be used.
“Technical information” (P. 20)
Begin
select
For the next page (Yellow)
Shown only when
powering on for the fi rst time.
The power on the remote control can also be used.
Edit channels
When not using T-V LINK When using T-V LINK
If “FEATURE NOT
AVAILABLE” appears :
Is the T-V LINK compatible
device connected to EXT-2?
Is the device turned on?
If “ACI START” appears, select
and start settings. (This will set up
cable television channels.)
“What is ACI (Automatic
Channel Installation)?” (P. 20)
Finish
Confi rm
in “Editing channels”
(P. 9)
When turning on the TV,
it takes about 1 minute
to project the picture to
its full brightness.
When turning off the
TV, it takes about 5
seconds to make the
screen dark. After that,
cooling is performed for
about 90 seconds.
“About LAMP indicator” (P. 6)
1
3
2
4
5
6
Select a language
Select the country of installation
Automatically register channels
Check what was registered
select
set