JVC DynaPix HD-56ZR7J - Manual (Page 7)

5
!
SET UP
SET UP
AUTO PROGRAM
DECODER(EXT-2) COMPONENT AUTO SELECT
HDMI SETTING
ON OFF
EXT SETTING
EDIT/MANUAL LANGUAGE
LAMP TIMER RESET
IMPOR
T
ANT!
PREP
ARE
USE
SETTINGS
TR
OUBLE?
Select “SET-UP”
Display the menu bar
Select “LAMP TIMER RESET”
Finish
select
next
select
next
5
6
Install the NEW lamp unit
7
Reinstall the lamp cover
THE LAMP
TIMER IS RESET
SUCCESSFULLY PRESS OK TO
RESET THE LAMP
TIMER
Tighten the screw.
4
1
2
3
4
Finally, the lamp has been replaced!
1
3
Turn the TV on Plug in the TV
Reset the lamp timer
If the lamp unit is not installed
securely (e.g. fl at in the lamp
housing area), the TV won’t turn on.
In this case, reinstall the lamp unit.
Make sure the lamp sits securely
and fl at in the housing area.
Never dispose of the lamp with normal trash!
The lamp contains a small amount of mercury. For disposal or recycling information, please
contact your local authorities or consult your retailer.
Dispose of it in the same way as disposing of fl uorescent lamps.
If the power lamp and LAMP indicator blink rapidly after turning on the TV “Lamp” (P. 20)
Insert Re-tighten
Unpack
2
It may shatter the lamp causing injuries.
Do not drop the lamp!
Do not shock the glass surface
of the lamp!
Oils deposited from the fi nger may
cause a difference in temperature
when the lamp heats up to its
operating temperature, causing the
lamp to break.
Never touch the glass
surface of the lamp!
!