JVC AV-27F803 - Manual (Page 14)

INPUT 4
S VIDEO VIDEO
INPUT 1
R L MONO
AUDIO
OVER
R L MONO
R L
75Ω
(VHF / UHF)
AUDIO COMPONENT
VIDEO
COMPONENT
VIDEO
Y
P B
P R AV COMPULINK
AUDIO OUT
INPUT 2
CABLE or ANTENNA
OUT
OR
OR
IN
OUT
VCR
V L R
Cable Box
OUT IN
Illustration of AV-27F803
Connections
14
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable
box.
2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of
the VCR.
3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the
TV.
4) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video
input.
5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
6) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
• Please see page 47 for information on using the PIP feature with a Cable Box.
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s
Left Audio Input.
• Please consult your VCR’s owner’s manual for more information on its operation.
Cable and VCR Connections - Continued
Diagram #2
AV-27,32,36F703/713/803 English 6/14/02 5:07 PM Page 14