John Deere 850C WT User Manual
Page 3
18
Dimensions
A
Overall height to roof
Overall height
B
Tread depth with single-bar grousers
Tread depth with
C
Ground clearance
to exhaust stack
swamp shoes
with grousers
Moderate duty
Extreme duty
850C LT ..........................124.0 in. (3151 mm)
124.8 in. (3170 mm)
2.6 in. (65 mm)
2.8 in. (72 mm)
16 in. (406 mm)
850C WT.........................124.0 in. (3151 mm)
124.8 in. (3170 mm)
2.6 in. (65 mm)
16 in. (406 mm)
850C WXLT .....................124.0 in. (3151 mm)
124.8 in. (3170 mm)
2.6 in. (65 mm)
16 in. (406 mm)
850C LGP........................124.0 in. (3151 mm)
124.8 in. (3170 mm)
2.6 in. (65 mm)
3.7 in. (93 mm)
16 in. (406 mm)
D
Blade width
E
Blade height
F
Blade lift height
G
Blade dig-
H
Blade tilt
I
Overall
J
Overall width
ging depth
(uses tilt jack)
length
with blade
with blade
angled
850C LT
All-Hydraulic
(PAT) Dozer ..............146.0 in.
48.3 in.
38.0 in.
33.4 in.
19.0 in.
203.1 in.
131.6 in.
(3708 mm)
(1227 mm)
(962 mm)
(849 mm)
(482 mm)
(5160 mm)**
(3343 mm)
Semi-U (High
Production) ..............128.3 in.
56.5 in.
43.3 in.
20.2 in.
28.7 in.
207.1 in.
N/A
(3259 mm)
(1435 mm)
(1100 mm)
(513 mm)
(730 mm)
(5262 mm)*
*Optional extended drawbar adds 10.1 in. (253 mm).
**Optional extended drawbar adds 8.9 in. (223 mm).
850C WT
All-Hydraulic
Dozer (PAT) ..............158.0 in.
48.3 in.
38.0 in.
33.4 in.
20.5 in.
203.1 in.
142.4 in.
(4013 mm)
(1227 mm)
(962 mm)
(849 mm)
(522 mm)
(5160 mm)**
(3618 mm)
Semi-U (High
Production) ..............140.0 in.
56.5 in.
43.3 in.
20.2 in.
34.6 in.
207.1 in.
N/A
(3556 mm)
(1435 mm)
(1100 mm)
(513 mm)
(878 mm)
(5262 mm)***
**Optional extended drawbar adds 8.9 in. (223 mm).
***Optional extended drawbar adds 7 in. (176 mm).
850C WXLT
All-Hydraulic
Dozer (PAT) ..............158.0 in.
48.3 in.
40.7 in.
35.2 in.
20.5 in.
218.5 in.
142.4 in.
(4013 mm)
(1227 mm)
(1034 mm)
(893 mm)
(522 mm)
(5553 mm)**
(3618 mm)
**Optional extended drawbar adds 8.9 in. (223 mm).
850C LGP
Semi-U (Low Profile) and Straight blades available through Custom Engineering.
All-Hydraulic
(PAT) Dozer ..............168.0 in.
48.3 in.
40.7 in.
35.2 in.
21.8 in.
218.5 in.
152.0 in.
(4267 mm)
(1227 mm)
(1034 mm)
(893 mm)
(554 mm)
(5553 mm)**
(3860 mm) /
144 in.
(3658 mm)#
Semi-U (High
Production) ..............156.6 in.
43.8 in.
42.5 in.
16.9 in.
37.0 in.
222.5 in.
N/A
(3978 mm)
(1113 mm)
(1080 mm)
(429 mm)
(940 mm)
(5651 mm)**
**Optional extended drawbar adds 8.9 in. (223 mm).
#With L/R angle cylinder pins removed at blade.
K
Blade angle
L
Cut reach
M
Width over track
N
Cast reach
O
Cutting edge angle
850C LT
All-Hydraulic
(PAT) Dozer ..............25 degrees
4.5 in. (113 m)
106 in. (2692 m)
21.2 in. (538 m)
60 degrees
850C WT
All-Hydraulic
(PAT) Dozer ..............25 degrees
3.9 in. (98 m)
118 in. (2997 m)
20.5 in. (523 m)
60 degrees
850C WXLT
All-Hydraulic
(PAT) Dozer ..............25 degrees
3.9 in. (98 m)
118 in. (2997 m)
20.5 in. (523 m)
60 degrees
850C LGP
All-Hydraulic
(PAT) Dozer ..............25 degrees
4.5 in. (113 mm)
126 in. (3200 mm)
21.2 in. (538 mm)
60 degrees
Drawbar Pull
850C
Maximum ........................................................................................72,000 lb. (320 kN)
At 1.2 mph (1.9 km/h) .....................................................................35,200 lb. (156 kN)
At 2.0 mph (3.2 km/h) .....................................................................25,300 lb. (112 kN)