Jensen PORTABLE STEREO SPEAKER SYSTEM SMPS-125 - Manual (Page 4)

4
Bottom View Rear View
OPERATION GUIDE
This Speaker System is equipped with 2 Auxiliary (AUX-IN) Inputs:
A fold-down 3.5mm plug is located in the 0.6” well that runs across the length of the unit
and a second 3.5mm plug and cord is located in the battery compartment. You can use
either one for playing.
1. Fully insert the AUX Input plug from the bottom cabinet of the Speaker System into
the Headphone Jack of your external audio player (MP3 player, iPod ® , iPhone™ iPad)
or
2. Lift up the 3.5 mm plug located in the well and connect it to the Headphone Jack of
your iPod or other digital audio player if applicable.
3. Slide the POWER SWITCH to the “ON” position. The Power Indicator will light.
4. Turn on the external audio player that you plan to connect to this Speaker System
and set the volume level to a low setting.
5. Follow the iPod/iPhone/iPad operation instructions to operate your
iPod/iPhone/iPad.
6. Gradually adjust both the output of the attached player and the Speaker System until
the desired volume level is reached.
BATTERY COMPARTMENT
AUDIO CABLE
(inside compartment)
VOLUME CONTROL
DC JACK POWER SWITCH