JVC TS-C50P6G - Manual (Page 2)

English
9
Components
Points to note during installation
•
The wall-hanging bracket is for use in installing the Wide Plasma Display to a vertical wall
for viewing purposes. Do not use it for any type of installation other than vertical wall
installation.
•
In order to ensure correct, problem-free operation of the Wide Plasma Display , do not install
the Display in any of the following places.
• Places which are next to sprinklers or sensors
• Places which are subject to vibration or shocks
• Places which are close to high-voltage wires or electric motors
• Places in direct contact with air from heaters
•
When installing this wall-hanging bracket unit, use a fixing method appropriate to the type of
wall.
•
Insert the power cord plug for the Wide Plasma Display into a wall outlet which is close and
easily accessible.
•
Provide adequate ventilation so that the temperature around the display does not rise above
40°C (104 F°). If there is insufficient movement of the air inside display, heat may build up
inside the display, and fire may result.
Wall-hanging bracket unit ........1 Allen key (accessory) ......1
Fixing screw
(
M5-35)........................2
Insulating spacer
....................................4
Toothed pan washer
....................................4
Pan head bolt with
hex socket (M8-45) .........4
(Fixing screw)