Jensen JBX100SR - Manual (Page 5)

128-7041
5 of 12
-5-
Boom Box JBX100SR Controls
The Jensen Sirius® Boom Box JBX100SR provides
two control buttons, a Power On/Off -Volume control,
and a pushbutton to toggle between Satellite Radio or
an auxiliary audio input signal. A power-on LED is also
located on the front panel.
1. PHONES Jack: Accepts a stereo headphone jack
to provide private listening capability for the Boom
Box.
2. SRS/AUX Selector Pushbutton: Pushbutton
toggles between Satellite Radio and an external
audio input signal (MP3, CD, etc.) present at the
AUX input jack.
3. AUX Jack: Accepts an audio input signal from
an external audio device. When
using the AUX audio
input, turn the Shuttle
off to preserve battery
power. Adjust the
volume level of the
external audio device
to obtain audio output from the JBX100SR. The
volume control on the external audio device
should be set to mid-range.
4. Power On/Low Battery LED: The LED lights
green when the Power On/Off Switch-VOL control
i s rotated clockwise (CW) to the On position. In
addition, the LED will light red to alert the user
that the batteries are nearly discharged. This
condition may cause degraded performance of
the JBX100SR.
5. Power On/Off Switch-VOL Control: Applies power
to the Boom Box when rotated clockwise (CW) from
the Off position. When in On position, increases or
decreases the volume of the audio output signal
from the JBX100SR. To increase the volume level,
rotate the control CW. To decrease the volume level,
rotate the control counterclockwise (CCW).
6. Release Button: Press this button to release and
remove the Shuttle from the JBX100SR cradle.
1. Battery Installation
Your Boom Box can operate independently of AC
power by installing 8 D-Cell batteries as follows:
NOTE: The batteries are bypassed automatically
whenever the supplied AC Adapter is
plugged into the DC 12V jack on the back
panel.