John Deere 700H XLT - Manual (Page 5)

DKA700H Litho in U.S.A. (02-03)
Net engine power is with standard equipment including air cleaner, exhaust
system, alternator, and cooling fan, at standard conditions per SAE J1349
and DIN 6270B, using No. 2-D fuel at 35 API gravity. No derating is required
up to 10,000-ft. (3050 m) altitude. Gross power is without cooling fan. Specifications and design subject to change without notice. Wherever applicable, specifications
are in accordance with SAE standards. Except where otherwise noted, specifications are based
on units with standard equipment, rollover protective structures, full fuel tanks, and 175-lb.
(79 kg) operators; 700H LT unit with 120-in. (3048 mm) blade and 20-in. (510 mm) track
shoes; 700H XLT unit with 120-in. (3048 mm) blade and 22-in. (560 mm) track shoes; and
700H LGP unit with 132-in. (3353 mm) blade and 30-in. (760 mm) track shoes.
700H Dozer
Key: ●
Standard equipment
▲
Optional or special equipment
✶
See your John Deere dealer for further information.
LT XLT LGP Engine
● ● ●
115-hp (86 kW) turbocharged, isolation mounted
● ● ●
Oil-to-water engine oil cooler
● ● ●
Vertical spin-on oil filter
● ● ●
Vertical spin-on fuel filters with water separator
● ● ●
Dual-element dry air cleaner with built-in pre-
cleaner and evacuator valve
● ● ●
Above-hood pre-screener/raincap
▲ ▲ ▲
External primary precleaner
✶
● ● ●
Enclosed safety fan guard (conforms to SAE J1308)
● ● ●
Coolant recovery tank
● ● ●
Blower-type cooling fan
● ● ●
Trash-resistant seven-fin in-line radiator
● ● ●
Under-hood muffler with vertical exhaust stack
● ● ●
Pre-wired for ether start aid
▲ ▲ ▲
Electric ether start aid
▲ ▲ ▲
Radiator sand screen (steel)
▲ ▲ ▲
Engine coolant heater, 1,000 watts, 110 volts
▲ ▲ ▲
Engine coolant heater, fuel fired
Powertrain and Controls
● ● ●
Dual-path hydrostatic transmission
● ● ●
Single-lever steering, speed, and direction control
● ● ●
Decelerator pedal with automatic retardation
● ● ●
Engine-speed selection lever
● ● ●
Automatic tracking control
● ● ●
Dynamic braking (anti-free wheel)
● ● ●
Counterrotation
● ● ●
Transmission neutral lock with safety start switch
● ● ●
Spring-applied, hydraulic-released parking brake
● ● ●
Independent transmission oil reservoir with
sight gauge
● ● ●
Onboard diagnostics with visual code display
● ● ●
Oil-to-air transmission oil cooler
● ● ●
Built-in final drive seal guards
● ● ●
Triple-reduction final drives with wet multi-disc
brakes
● ● ●
Max. forward/reverse speed 5.5 mph (8.9 km/h)
● ● ●
Selectable reverse speed ratio setting of 80, 100,
115, or 130% of forward speed
▲ ▲ ▲
Remote diagnostic test ports
C-Frames and Blades
● ● ●
Six-way all-hydraulic heavy-duty C-frame with
infinitely adjustable blade pitch
● ● ●
Remote C-frame pivot grease banks
● ● ●
Cordura-covered hoses with replaceable lengths
● ● ●
Straight end bits
● ●
Blade, 120-in. (3048 mm), with heavy-duty C-frame
●
Blade, 132-in. (3353 mm), with heavy-duty C-frame
▲ ▲
Blade, 132-in. (3353 mm), with heavy-duty
C-frame
✶
Electrical (24-volt system)
● ● ●
Fuse panel with blade-style multi-fused circuit
breakers
● ● ●
Horn, electric (conforms to SAE J994, J1446)
● ● ●
Reverse warning alarm (conforms to SAE J994,
J1446)
● ● ●
Fuel gauge, electric, illuminated
● ● ●
Hourmeter, electric
● ● ●
Transmission oil pressure gauge, illuminated
● ● ●
Master electrical disconnect
● ● ●
Positive battery terminal covers with battery cover
● ● ●
By-pass start safety cover at starter
● ● ●
Electronic monitor with visual and audible
warning: Alternator / Hydraulic filter restric-
tion / Transmission filter restriction / Transmis-
sion oil temperature / Coolant temperature
(audible) / Engine coolant temperature gauge /
Engine oil pressure (audible) / Engine oil pres-
sure gauge / Air cleaner restriction / Fasten seat
belt / Park brake
● ● ●
Ground-speed selection display
LT XLT LGP Electrical (24-volt system) (continued)
● ● ●
Dual 12-volt low-maintenance batteries, 190-min.
reserve capacity, 950 CCA
● ● ●
55-amp sealed alternator with cab or canopy
▲ ▲ ▲
Power port, 12 volt, 20 amps, for phone and radio
Hydraulic System
● ● ●
25-gpm fixed-displacement hydraulic gear pump
▲ ▲ ▲
Pump with through-drive for winch or auxiliary
pump
● ● ●
Low-effort T-bar blade control
● ● ●
Independent hydraulic reservoir with sight gauge
● ● ●
Vertical spin-on hydraulic filter
● ● ●
O-ring face seal hydraulic connectors
● ● ●
Three-function hydraulic valve
▲ ▲ ▲
Four- and five-function valves with levers, with-
out float
▲ ▲ ▲
Rear auxiliary plumbing
Undercarriage
●
70-in. (1778 mm) track gauge, 95-in. (2413 mm)
track on ground
●
70-in. (1778 mm) track gauge, 102-in. (2591 mm)
track on ground
●
78-in. (1981 mm) track gauge, 102-in. (2591 mm)
track on ground
● ● ●
Double-flange rollers
● ● ●
Oscillating track frame with pinned front crossbar
● ● ●
Full-length smooth-surface track-frame covers
● ● ●
Chain guides, front and rear (bolt-on)
● ● ●
Fully protected track-tension adjusters (grease
adjustable)
● ● ●
Segmented sprockets
▲ ▲ ▲
Sprocket rock guards (bolt-on)
▲ ▲ ▲
Bolt-on full-length track-roller rock guards
● ● ●
Sealed and lubricated track chains
● ▲ ▲
20-in. (510 mm) extreme-service, single-bar
grousers
▲ ● ▲
22-in. (560 mm) extreme-service, single-bar
grousers
▲
24-in. (610 mm) extreme-service, single-bar
grousers
●
30-in. (760 mm) extreme-service, single-bar
grousers
▲
Swamp shoes, 30-in. (760 mm), self-cleaning
pyramid
Lights (optional)
▲ ▲ ▲
Grille-mounted high-intensity lights (2), with
rear light (1), halogen, 50 watts each
▲ ▲ ▲
High-intensity work lights, front (2) and rear (2),
with steel guards, 50 watts each
Operator’s Station
● ● ●
Modular ROPS/FOPS canopy, isolation mounted
(conforms to SAE J1040)
▲ ▲ ▲
Under-seat canopy heater, 30,000 Btu/hr.
▲ ▲ ▲
Modular ROPS/FOPS cab, isolation mounted
(conforms to SAE J1040): Fresh air intake cab
heater/defroster/pressurizer, 18,000 Btu/hr. with
air precleaner / Dome light / Deluxe headliner
with molded air ducts for heater, defroster, and
air conditioner / 30,000-Btu/hr. under-seat heater /
Front windshield and doors, wipers and washers /
Tinted safety glass
▲ ▲ ▲
Air conditioning, 24,000 Btu/hr.
● ● ●
Right and left operator station entry
● ● ●
Slip-resistant front-mounting steps
● ● ●
Ergonomically located handholds
● ● ●
Headliner and floormat
● ● ●
Adjustable footrests and full-length armrests
● ● ●
Built-in Operator’s Manual storage
● ● ●
Suspension vinyl seat (conforms to SAE J899): Fore
and aft/weight and height combined adjustment /
LT XLT LGP Operator’s Station (continued)
Adjustable leg support / Seat belt, 2 in. (51 mm),
retractable with CRS (con
forms to SAE J386)
▲ ▲ ▲
Deluxe comfort control mechanical suspension
seat, vinyl or cloth (conforms to SAE J899): Fore
and aft/weight and height combined adjustment /
Adjustable leg support / Adjustable backrest
angle / Adjustable lumbar support / Adjustable
seatback extension / Seat belt, 3 in. (76 mm),
retractable with CRS (conforms to SAE J386)
▲ ▲ ▲
Deluxe comfort control air suspension seat,
vinyl or cloth (conforms to SAE J899): Fore and
aft/weight and height combined adjustment /
Adjustable leg support / Adjustable backrest
angle / Adjustable lumbar support / Adjustable
seatback extension / Seat belt, 3 in. (76 mm),
retractable with CRS (conforms to SAE J386)
▲ ▲ ▲
Seat belt, 3 in. (76 mm), retractable with CRS
(conforms to SAE J386)
● ● ●
Convex interior rearview mirror
▲ ▲ ▲
Rear attachment mirror (for cab only)
▲ ▲ ▲
Accessories: Convex wide-angle interior rearview
mirror / Leg cushions (2) / Seat-side lockable
storage box/lunch box/cup holder
▲ ▲ ▲
Rear window wiper and washer for cab
▲ ▲ ▲
Radio, AM/FM weatherband with digital clock
and antenna
Overall Vehicle
● ● ●
One-piece unitized construction mainframe
● ● ●
Front tow loop (bolt-on)
● ● ●
Reinforced engine and mid-frame bottom guards
● ● ●
Integral transmission guard
● ● ●
Heavy-duty louvered grille
● ● ●
Perforated engine side shields
● ● ●
Vandal protection lock provisions for: Engine
service access cover / Fuel fill / Hydraulic reser-
voir fill/check / Transmission reservoir fill/check /
Instrument panel
● ● ●
Solid hood (painted gray for reduced glare)
● ● ●
Lockable grease gun/tool storage compartment
in right access door
▲ ▲ ▲
Environmental drains
▲ ▲ ▲
Chrome exhaust stack
▲ ▲ ▲
Manuals/trademarks/decals, French or Spanish
▲ ▲ ▲
Transport lift and tie-down rings
✶
Protection Packages
▲ ▲ ▲
Extreme-duty louvered grille and hose protection
▲ ▲ ▲
Limb risers, arched or point-to-point (bolt-on)
▲ ▲ ▲
Operator-protective rear screen (canopy or cab)
▲ ▲ ▲
Operator-protective side screens (canopy or cab)
▲ ▲ ▲
Operator-protective full-screen package (canopy
or cab)
▲ ▲ ▲
Heavy-duty engine air-intake guard
▲ ▲ ▲
Extreme-service rear tank guard
▲ ▲ ▲
Air-conditioning module guard
▲ ▲ ▲
Lift cylinder guards
Attachments
▲ ▲ ▲
Counterweight, front, 380 lb. (172 kg)
▲ ▲ ▲
Counterweight, rear
✶
▲ ▲ ▲
Retrieval hitch with pin
▲ ▲ ▲
Extended rigid drawbar with pin for pull-type
implements
▲ ▲ ▲
Drawbar, extended for winch (with or without
Fairlead)
▲ ▲ ▲
Ripper, parallelogram with five shank pockets
and three teeth
▲ ▲ ▲
Winch, John Deere 4000S, power in/free spool
out OR power out
▲ ▲ ▲
Four-roller fairlead for winch
▲ ▲ ▲
Root-rake blade attachment
▲ ▲ ▲
Rear-mounted toolbox