Tape recording, Cont.), Zooming – JVC GR-DVL522 User Manual

Page 18

Advertising
background image

18

EN

TAPE RECORDING

(cont.)

FEATURE:

Zooming

PURPOSE:

To produce the zoom in/out effect, or an instanta-
neous change in image magnification.

OPERATION:

Zoom In
Slide the Power Zoom Lever towards “T”.
Zoom Out
Slide the Power Zoom Lever towards “W”.

The further you slide the Power Zoom Lever, the
quicker the zoom action.

NOTES:

Focusing may become unstable during Zooming. In
this case, set the zoom while in Record-Standby,
lock the focus by using the manual focus
(

pg. 41), then zoom in or out in Record mode.

Zooming is possible to a maximum of 700X, or it
can be switched to 10X magnification using the
optical zoom (

pg. 45).

Zoom magnification of over 10X is done through
Digital image processing, and is therefore called
Digital Zoom.

During Digital zoom, the quality of image may
suffer.

Digital zoom cannot be used when the VIDEO/
MEMORY
Switch is set to “MEMORY” (

pg. 17).

Macro shooting (as close as approx. 5 cm (2") to
the subject) is possible when the Power Zoom
Lever is set all the way to “W”. Also see “TELE
MACRO” in the Menu Screen on page 46.

1x W

T

0

1 x W

T

0

1 x W

T

0

2 x W

T

0

4 x W

T

Zoom in (T: Telephoto)

Zoom out (W: Wide angle)

Power Zoom Lever

Zoom display

Approximate zoom ratio

Digital zoom zone

10X (optical)
zoom zone

Advertising