JVC DLA-HD10KSU/E - Manual (Page 11)

11
Controls and Features
A
Indicator
Please refer to
AIndicatorsB (A Page 14) for details.
B
Air Inlets (2 in front and 1 at bottom surface)
The air inlets absorb air to cool the interior of the unit.
Do not block or allow warm air to blow into them. This
may cause the unit to malfunction.
C
Power Zoom Lens
DLA-HD10KU/E :1.9x power zoom lens
DLA-HD10KSU/E:1.4x power zoom lens
● Before projection, remove the lens cap. (A Page 26)
D
Remote Sensor (Front)
When operating with the remote control, aim it
towards the sensor. (
A Page 23)
● A remote sensor is also located on the rear of the unit.
E
Lens Cap
● Fit the cap on the lens when this unit is not in use to
prevent the lens from becoming dirty. ( A Page 26)
F
Lens Shift Cover
Remove this cover when using the Lens Shift feature
for shifting the projecting position in the vertical
direction. (
A Page 22)
G
Foot
It is set at the lowest position when shipped from the
factory. This unit does not come with a function to
adjust the gradient.
H
Filter
Cleans air drawn in from the air inlet. Please clean this
filter regularly. (
A Page 39)
Front Side/Top Surface/Bottom Surface
A
B
F
B
C D
E
G
H
G
Bottom Surface
ENGLISH
DLA-HD10_EN-FR.book Page 11 Thursday, November 10, 2005 12:54 PM