JVC GR-DVL517 - Manual (Page 55)

EN
55
COPY OF F
ON
–
SP 6
Play/Pause Button (4/6)
Display
Power Switch
SNAPSHOT Button
Lock Button
Dubbing Images Recorded On A Tape To A
Memory Card
(GR-DVL817 only)
Images can be dubbed from a tape to a memory card .
1 Load a memory card (
੬
pg. 14) and cassette
(
੬
pg. 12).
2 Select the Snapshot mode in the Menu Screen
(
੬
pg. 26) to use for dubbing the image to the
memory card.
3 Set the VIDEO/DSC Switch to “VIDEO”, then set the
Power Switch to “
” while pressing down the
Lock Button.
4 Press the MENU/BRIGHT wheel in. The Menu
Screen appears. Rotate it to select “
VIDEO” and
press it. The VIDEO Menu appears.
5
Rotate the MENU/BRIGHT wheel to select
“
COPY” and press it. The Sub Menu
appears. Rotate it to select “ON” and press it.
Selection is complete.
6
Rotate the MENU/BRIGHT wheel to select
“1RETURN” and press it twice. The normal playback
screen resumes.
7 To select a video image to be dubbed, start playback
by pressing 4/6. At the moment you find the image
you wish to dub, press it again to engage Still
Playback.
8
To start dubbing, press SNAPSHOT. The selected
image is stored in the memory card.
•“
” blinks during dubbing.
NOTES:
● If SNAPSHOT is pressed in step 8 when a memory card
is not loaded, the message “COPYING FAILED” is
displayed.
● If an image recorded on the tape using the WIDE mode
(
੬
pg. 48) is dubbed to a memory card, the WIDE
mode identifying signal is not dubbed with it.
● To use Playback Special Effects with a video image you
wish to dub, perform up to step 8 using the remote
control (
੬
pg. 59).
MENU/
BRIGHT Wheel
VIDEO/DSC Switch
(Open the LCD monitor
to access this switch.)
Menu Screen