John Deere AC-2500E User Manual
Page 28
Storage
8
Operator’s Manual
WINTERIzINg
. Optional Procedure:
a. Shut the unit off.
b. Relieve system pressure by pointing the trigger gun in a safe direction and
squeezing the trigger until water flow ceases to exit the nozzle.
c. Disconnect and drain the hose, gun and wand.
d. Start the unit and allow it to run until all the water exits the unit. Once the
water has stopped flowing from the unit, turn off.
NOTE: When using this procedure, caution should be used as ice chips can form
from drops of water which could cause the unit to burst if starting before
completely thawed.
STARTINg uNIT AfTER ExTENdEd STORAgE
. BE CERTAIN the unit is NOT plugged into the power source.
. Prior to restarting the unit, thaw out any possible ice from the wand, gun, hose
and unit.
. After following all "PREPARATION" instructions, start the unit momentarily and
immediately turn "OFF" to ensure all parts are lubricated before operation.